BSIS Firearms Training Manual - October
Please note: This is a
copyright of BSIS and is provided for the benefit of students. As a
state-licensed BSIS training facility, we are providing this for
instruction to our students seeking the guard card.
Oceanside, California 92054
United States of America
Phone: (310) 490-3697
CLICK TO PAY FOR A
Home - Security
Who We Are
Our Other Locations
BACK TO MAIN PAGE
d. Magazine/Catch Release
(1) Check to see that magazine drops freely when magazine release is depressed.
(2) Examine for dents, cracks and burrs.
(3) Check for smooth travel of follower.
(4) Check to see if slide locks back with empty magazine.
e. Magazine Well
Examine for cleanliness. Determine if magazine locks in firmly.
a. Under normal conditions, the firearm should be cleaned when it comes in contact with moisture or any possible
obstruction such as dirt and dust.
b. The build-up of powder residue, shaved lead, and other debris that occur during shooting can penetrate the action of the firearm and eventually cause mechanical problems.
c. Firearms must be properly lubricated.
d. Firearms should be cleaned after each shooting.
d. Cleaning Kit
a. An acceptable gun cleaning kit will include, but is not limited, to:
(1) A can of lubricating oil. (NOTE: Never use household oil, as it will collect dust and other particles.)
(2) A can of solvent.
(3) A bore brush.
(4) A bore patch holder.
(5) Bore patches.
(6) A toothbrush.
(7) A small screwdriver.
e. To clean the weapon. (Instructor Discussion)
(310) 490-3697 for Security Training in San Diego
| PREVIOUS | TABLE OF
Training All rights reserved. Webmaster Ruperto Elpusan Jr., Chief